KinetiX™ foot orthoses

KinetiX™

Evidence-based foot orthoses

Exclusively for medical professionals

A comprehensive range of foot orthoses designed to help clinicians select and fit an evidence-informed mechanical prescription at the point of care.

Explore five distinct KinetiX™ designs, each with integrated mechanical features and available in Soft A40, Medium A55 and Hard A70 for adolescent and adult sizes.

About KinetiX™

KinetiX™ is a comprehensive toolkit of foot orthoses for clinicians managing musculoskeletal foot and lower-limb conditions. The range contains five core designs, each with different evidence-informed features integrated into its shape to create a defined mechanical prescription.

Models differ in their heel wedging, heel skive, forefoot wedging and heel raise. Models A and B are also available in three-quarter-length As and Bs variants, while optional MicroGrip™ surface additions allow further chairside customisation when required.

Adolescent and adult sizes are available in Soft A40, Medium A55 and Hard A70. Selecting the model and hardness should follow clinical assessment, treatment objectives, footwear and the patient’s response.

Choosing the right KinetiX™ insole

When selecting a prescription, consider:

Use the technical specification and adult or paediatric prescription chart below to support model selection. Clinical judgement and review of the patient’s response remain essential.

How to order

1
Choose the KinetiX™ model
2
Select the required size
3
Determine shell hardness
4
Choose any optional surface additions
counter_5
Place the order

Technical Specification by Model

The five core designs provide different combinations of rearfoot and forefoot wedging, heel skive and heel raise.

Table showing KinetiX technical specifications for models A to E. Heel wedge: A 8 degrees medial, B 4 degrees medial, C 4 degrees medial, D 4 degrees medial, E 0 degrees. Modified medial heel skive: A yes, B no, C no, D yes, E no. Forefoot wedge: A 0 degrees, B 0 degrees, C 5 degrees lateral, D 4 degrees medial, E 5 degrees lateral. Heel raise: A, B, C, D and E all have 2 mm heel raise.

Shell Hardness

Adolescent and adult KinetiX™ sizes are available in three material hardnesses. Hardness describes material resistance; it is not the same as density.

Clinical note: hardness selection should be based on assessment and the force required from the orthosis, not body weight alone.

Table showing KinetiX hardness selection guide. Soft has Shore value A40 and is typically selected for low supination resistance where the arch corrects easily. Medium has Shore value A55 and is typically selected for moderate supination resistance where correction requires some effort. Hard has Shore value A70 and is typically selected for high supination resistance with minimal correction with effort.

Product Selection by:

KinetiX™ Additions

KinetiX­™ additions allows the plantar surface of any insole or shoe to be modified quickly and easily without the need for a workshop or tools.

Features:

  • Allows customisation of KinetiX­™ foot orthoses
  • Quick and easy to use
  • No workshop or tools required

How to use additions with KinetiX­™:

  • TalarMade KinetiX­™ Additions attach to KinetiX­™ foot orthoses with MicroGrip. They can easily and immediately positioned on the surface of our foot orthoses to further change the way forces are applied to the foot.
  • Select the required addition, place into the required position on the surface of the insole. KinetiX­™ additions can be trimmed as required.
  • Pads can be repositioned easily to optimise their effectiveness.

Five insole designs with different built-in mechanical features

  • Five integrated insole designs: Models A, B, C, D and E
  • Three material hardnesses: Soft A40, Medium A55 and Hard A70
  • Full-length designs, plus three-quarter-length A and B variants
  • Adult and paediatric prescription pathways
  • Optional MicroGrip™ surface additions
  • Clinical education and product-selection support

 

Filter

KinetiX™ Model A

Designed to resist pronation velocity and medial arch deformation

KinetiX™ Model B

A versatile prescription for common musculoskeletal presentations

KinetiX™ Model C

Integrated support for midfoot and first-ray hypermobility

KinetiX™ Model D

Specialist support for fixed forefoot varus

KinetiX™ Model E

Reduces tension in lateral structures and the plantarfascia

Frequently asked questions

What is KinetiX™?

KinetiX™ is a comprehensive range of evidence-informed foot orthoses for clinicians. Five distinct designs provide different built-in mechanical prescriptions for managing musculoskeletal foot and lower-limb conditions.

There are five core designs: Models A, B, C, D and E. Models A and B are also available as three-quarter-length As and Bs variants.

Adolescent and adult sizes are available in Soft A40, Medium A55 and Hard A70. The required hardness should be selected following clinical assessment.

No. Each model has its main mechanical design features integrated into the insole. The clinician selects the design that best matches the treatment objective.

Yes. Compatible MicroGrip™ surface additions can be repositioned on the receptive top cover to modify local support or loading during assessment and review.

Clinicians can use the technical specification and adult or paediatric prescription charts alongside assessment findings, treatment objectives, footwear and the patient’s response.

Where a suitable model, size and hardness are available, KinetiX™ can be selected, fitted and reviewed during the same appointment.

KinetiX™ is intended for selection and supply by healthcare professionals. Contact TalarMade for professional account, ordering and clinical-support information.

Trade pricing and support

KinetiX™ models are available to registered professional customers. Log in to order, access clinical resources or contact TalarMade for product-selection and educational support.