Home › Pressure Care › Pressure Offloading › TalarMade Wedge
TalarMade Wedge supports the lower legs while allowing both heels to extend beyond the end of the device and remain completely free from contact with the bed.
It is designed for people at risk of developing heel pressure ulcers or requiring heel offloading as part of the treatment of an existing pressure ulcer.
TalarMade Wedge is one size and is positioned between the mattress and bottom sheet.
The wedge is inflated using the supplied pump and secured to the bed. The patient’s calves rest on the wedge with both heels extending completely beyond the end of the device.
TalarMade Wedge does not replace regular patient repositioning and should always be used as part of an overall pressure care plan.
Regularly check that both heels remain completely offloaded and inspect the skin around the heels and calves.
TalarMade Wedge is a multi-patient use device and must be appropriately cleaned and disinfected between patients according to the Instructions for Use and local infection control procedures.
Trust and reassurance​
For further product guidance, see the downloads, videos and resources below.
Downloads, videos and product resources
Use the resources below to find sizing, fitting and usage information.
Patient FAQs
TalarMade Wedge helps prevent and manage heel pressure ulcers by keeping both heels completely off the bed surface.
The wedge supports the lower legs while the heels extend beyond its edge, keeping them suspended away from the mattress and completely offloaded.
Yes. One TalarMade Wedge can offload both heels at the same time.
It may be suitable for adults and children who are at risk of developing heel pressure ulcers or have existing heel pressure ulcers and require heel offloading.
No. TalarMade Wedge should be used as part of an overall pressure care plan and does not replace regular repositioning.
Yes. It is a multi-patient use device and should be appropriately cleaned and disinfected between patients.
Stop using the device and check the affected area. If redness, discomfort or other skin changes persist, seek advice from a healthcare professional.
TalarMade Wedge is a Class I inflatable heel offloading device designed to help prevent and manage heel pressure ulcers.
The wedge supports the calves while allowing both heels to extend completely beyond the device, suspending them away from the underlying support surface.
This provides complete bilateral heel offloading while redistributing load onto the calves.
Do not use where limb elevation is contraindicated, with unstable fractures or injuries of the lower limb or spine, or where use causes circulatory restriction or increased discomfort.
TalarMade Wedge should be selected following appropriate assessment of the patient’s clinical need and pressure ulcer risk.
Inflate and position TalarMade Wedge according to the Instructions for Use.
Secure the wedge to the bed with the calves supported and both heels extending completely beyond its end.
Check regularly that:
TalarMade Wedge provides a simple and effective way to completely offload both heels using a single device.
Its multi-patient design provides a practical heel offloading solution across hospital, care home and home care environments.
Professional downloads, videos and product resources
Access product resources to support selection, fitting, patient guidance and ordering.
Patient FAQs